Single Cage Building Hoist trilogy
1, Single Cage Building Hoist - foot: that is, oil foot, water foot, air foot
Diesel, gasoline and air supply is not timely or interrupted, there will be starting difficulties, poor combustion, power down, single cage crane engine can not function properly. If the oil supply is insufficient or interrupted, will make the engine lubrication bad, serious body wear or even burning tile phenomenon. If the cooling water will make the machine temperature is too high, power down, wear and tear, reduce the service life.
2, Single Cage Building Hoist - check: that is often check the fastening parts
Due to the use of diesel engine and gasoline engine by the impact of shock and load uneven, bolts, nuts easy to loose. There are parts of the adjustment bolts should be checked, so as to avoid loosening and damage to the body of the accident.
3, Single Cage Building Hoist - net: that is, net oil, water net, clean air and the body net
Diesel and gasoline is the main fuel of the single cage crane engine. If the diesel oil and gasoline are not pure, it will make the precision fit with the body wear, and the gap will increase, resulting in oil leakage, dripping oil, reduced oil pressure, Resulting in oil blockage, bearing shaft burning tile and other serious failures. If the air contains a lot of dust, will accelerate the cylinder, piston and piston ring wear. If the cooling water is not pure, will make the cooling system scale blocked, hinder a single cage crane engine cooling, lubrication conditions are poor, serious body wear. If the body is not the appearance of the net, will make the surface corrosion, shorten the service life.
4, Single Cage Building Hoist - with: that is, a single cage crane engine properly used
Before running, should make the bearing and other lubrication parts to be lubricated. Start after the water temperature should reach 40 ℃ -50 ℃ and then put into operation. It is forbidden to overload or low speed for a long time. Before unloading, the load should be unloaded to reduce the speed. Winter should be stopped after the water temperature dropped to 40 ℃ -50 ℃, put the net cooling water has been injected with antifreeze in addition to the engine. Usually have to do a good job of the engine maintenance work, so that a single cage crane engine is always maintained in good condition. To observe, check, find fault, timely exclusion.
5, Single Cage Building Hoist - grinding: that is running
This is the basis for extending the service life, whether it is a new car or overhaul after the engine, must be run according to the procedures, before they can put into normal operation.
6, Single Cage Building Hoist - tune: that is, diesel engine or gasoline engine valve clearance, gas phase, fuel supply advance angle, fuel injection pressure and ignition timing should be promptly checked and adjusted to ensure that a single cage crane engine Often in a good state of technology, can save fuel, extend the service life.
- Plastic Pallet Promotion Effect
- Vertical Stationary Lifting Platform
- Elevator Lift Maintenance Rules
- A Device Used In Machinery Industry
- How Self Elevating Platform Category
- Scissor Lift Platform Features
- Guide Rail Lifting Cargo Lift
- Stationary Hydraulic Lifting Cargo ...
- Mobile Maintenance Of Lifts
- Select Platform Experience
- Precautions When Operating A Single...
- How To Prevent On-site Dumping Acci...
- Heavy Weight Of Building Hoist
- How Long Should The Building Hoist ...
- How The Building Hoist Noise Is Pro...
- Motor Is An Important Part Of The B...
- What Are The Safety Rules For Build...
- Introduction Of Three Hoisting Meth...
- How The Building Hoist Industry Dea...
- Maintenance And Repair Of Parts Of ...